Service Hotline


How to solder micro-RF coaxial connector?


The miniature RF coaxial connector has obvious advantages in many connectors, light weight, small size, easy to use, etc., but many customers do not know how to solder the miniature RF coaxial connector. If the welding is wrong, it will cause Poor contact, which will cause signal transmission, how to solder the connector? The following small days will tell you how to solder the miniature RF coaxial connector.

1. Decompose the stripped head, put on the joint, tail gasket and waterproof ring

2, the gasket is mounted on the shield, the tube is inserted into the sheath and shielded

3, peel off the insulation layer of suitable length, peel off the core, and insert the small needle

As shown in Figure 4, put a small needle, it is just right for the small needle to be inserted, soldered with a welder

5, the main body is connected to the joint

6, tighten with pliers

Shenzhen Tiankele Communication Technology Co., Ltd. is a manufacturer of RF connectors with more than 10 years of production experience. It has the ability to produce 40GHZ / 65GHZ RF test level cables and military-grade products. We have a research and development team with more than 10 years of experience in manufacturing miniature RF coaxial connectors. We have sufficient strength in product quality and performance to ensure customers' requirements for products.

Copyright http://www.twl-link.com/ If you need to reprint, please indicate the source!

case number:【粤ICP备17068191号】 spider map RF Coaxial Connector Manufacturer © Copyright 2007-2019 | Website copyright (RF connector manufacturer)Twinlink Communication Technology(Shenzhen)Co.,Ltd