NewsYour location：Home > News > What is the RF interference source of the RF connector?
What is the RF interference source of the RF connector?
Today, electronic systems have clock frequencies of a few hundred megahertz, and the front and back edges of the pulses used are in the sub-nanosecond range. The network interface transmits data rates of 100 Mbit/s and 155 and 622 Mbit/s (ATM-Asynchronous Transfer Mode). High quality video circuits are also used for sub-nanosecond pixel rates. These higher processing speeds represent an ongoing challenge in engineering. Then Xiaotian came to introduce one of the challenges of RF connectors.
Radio frequency (RF) interference is caused by rapid changes in electromagnetic energy. The oscillation rate on the circuit becomes faster (rise/fall time), the voltage/current amplitude becomes larger, and the problem becomes more. Therefore, solving electromagnetic compatibility (EMC) is even more difficult today than before.
Before the two nodes of the circuit, the rapidly changing pulse current represents a so-called differential mode noise source, and the electromagnetic field around the circuit can be coupled to other components and invade the connection. The inductive or capacitively coupled noise is common mode interference. The RF interference currents are identical to each other and the system can be modeled as consisting of a noise source, a "damaged circuit" or "recipient" and a loop (usually a backplane). Several factors are used to describe the size of the interference:
●The strength of the noise source
● Interference current around the size of the area
● rate of change
Thus, although there is a high probability of unwanted interference in the circuit, the noise is almost always co-modeled. Once the cable is plugged in between the input/output (I/O) connector and the chassis or ground plane, some RF voltages can cause a few milliamps of RF current to exceed the allowable emission level.
Shenzhen Tiankele Communication Technology Co., Ltd., with 11 years of focus on RF connection, has the ability to produce 40GHZ/65GHZ RF test level cable and military grade products. It has 11 years of professional production and complete product process and technical team. If you have any questions about RF connectors, please call: 13684973846
Copyright http://www.twl-link.com/ If you need to reprint, please indicate the source!