Service Hotline


Common PCB connector FD method loss test


The signal transmission rate of high-speed interconnect links continues to increase. As a carrier for devices and signal transmission, the signal integrity of printed circuit board connector boards has a critical impact on the electrical performance of communication systems. Especially for the large-scale commercial use of 10G and 25G+ products, the monitoring of PCB connector transmission line insertion loss (insertion loss) is an important means of control in high-speed PCB development and mass production. Different high-speed products, customers will have signal loss. Different requirements

The FD method (frequency domain method) is one of the five loss test methods approved by IPC. The basic principle is to select the S parameter of the VNA test transmission line and directly read the insertion loss value. During the test, the system error is corrected because the fixture will affect the transmission line loss result. According to the measurement requirements and accuracy specifications, the most common proofreading method is TRL. TRL adopts 12 error models. According to the design and testing of the straight-through, reflection and transmission line calibration components on the PCB board, 12 equations can be obtained. An unknown amount, using a calibration algorithm to move the reference surface to the end of the fixture (de-embedded).

In theory, TRL can remove the effects of random structural fixtures and obtain complete small parameters, so the loss test accuracy is extremely high. However, this method is complicated in calibration operation and low in detection efficiency. At the same time, additional space is required to design the calibration piece. The conformity of the calibration piece and the connector of the device to be tested is very high. The specified reflection is basically the same, so it is used in the laboratory today. Research and development.

Shenzhen Tiankele Communication Technology Co., Ltd. is a 12-year RF connector manufacturer with the ability to produce 40GHZ / 65GHZ RF test-grade cable and military-grade products. It has 5 Fortune 500 companies and 25 China Top 100 companies. And 160 global customers choose to maintain 35% annual growth. PCB connector as the future 5G communication construction connector, is the core of many products manufacturing of Tiankele, in the pursuit of high quality products is the Tianke Le people to customers Guarantee.

Copyright http://www.twl-link.com/ If you need to reprint, please indicate the source!

case number:【粤ICP备17068191号】 spider map RF Coaxial Connector Manufacturer © Copyright 2007-2019 | Website copyright (RF connector manufacturer)Twinlink Communication Technology(Shenzhen)Co.,Ltd