logo SPECIALIZED IN RF CONNECTION MANUFACTURE

Service Hotline

0086(755)-29894199

How to choose a good quality SMA connector manufacturer-[Twinlink]

Time:2019-03-05

SMA connectors are commonly referred to as SMA series RF coaxial connectors. In RF circuit design, SMA is often added to the circuit for input and output signals. SMA is the most common connector in RF circuits. The new generation of instruments are equipped with SMA connectors or corresponding SMA adapters. Older instruments use more BNC. Therefore, always use the BNC to SMA connector when using the old meter. When we choose the manufacturer, the quality of the purchased SMA connector is not good, what effect will it have?


From the perspective of the influence on signal quality, a good SMA connector provides a good standing wave ratio and can effectively transmit signals for small signal reflection. Twinlink engineers have done a lot of tests. For a 50 ohm coaxial cable with two SMAs, when testing the losses caused by the entire line, most of the losses are not caused by cables, but SMA connectors and cables. The quality of the SMA joint is caused.


From the moment the material is selected, the SMA connector has been divided. Twinlink manufacturers from the inspection of each raw material to the quality control of each production link are: to improve product quality satisfaction from 99% to 99.99%

Copyright http://www.twl-link.com/ If you need to reprint, please indicate the source!

case number:【粤ICP备17068191号】 spider map RF Coaxial Connector Manufacturer © Copyright 2007-2019 | Website copyright (RF connector manufacturer)Twinlink Communication Technology(Shenzhen)Co.,Ltd

ABOUT

SKYPE

CALL

PRODUCT

CONTACT